Like digital photography of yesteryears, 3D scanning software has become much affordable for businesses and individual users alike. However, like other items out there, 3D scanners vary in terms of accuracy and quality. Still, there are some elements that the user may influence to create high-quality images and models. Without further ado, here are a few hacks that you can leverage to get high-quality captures using your scanner.

Use Proper Fixture

To ensure that the object being scanner doesn’t fall down half way through the scanning process, ensure that it is mounted properly. Place the object on a stable surface. If the object cannot sit well on a flat surface, use clay or dark putty to hold it in place.

Know How To Prepare Difficult Surfaces

Objects or parts with shiny, dark, or clear surfaces are very challenging to scan using structured-light and laser scanners because they use light as projection source. And light tend to scatter all over when scanning. To overcome this challenge, consider using a developer aerosol spray to temporarily coat such parts before scanning. The developer aerosol sprays a white powdery substance, creating a matte finish, which can be wiped off after scanning. You can also check for more tips on how to prepare difficult surfaces for scanning online.

Boost your 3D scanner’s accuracy by calibrating it

A poorly calibrated scanner will produce inaccurate results. Calibration help the scanner to determine distance—its rotation, position, and behavior—relative to the object being scanned, allowing it to capture accurate scans.

Although some 3D scanners require manual calibration by the user, others are calibrated by the manufacturer. Irrespective of where it is calibrated, it is important to remember that the better a scanner is calibrated, the higher scan quality it will produce. Additionally, it is worth noting that if you are going to calibrate the scanner yourself, you should do it very carefully. You can also contact your vendor if you need to know anything as far as the calibration process is concerned. There are also third party providers that you can hire to help you do the calibration, albeit at a fee.

Bottom-line

Getting high-quality scan will improve your 3D images and models. Hopefully, the above tips will go a long way in helping capture high-quality images using your 3D scanner. You will definitely make a few mistakes along the way but they should help you become a more experienced 3D scanning expert. Lastly, as hinted above, investing in a good 3D scanner will also help you get high quality scans.