Removing Fuel Contaminants, removing contaminants from fuel in a diesel tank is a must to avoid catastrophic damage to your vehicle. A double-walled steel fuel tank is recommended in heavy-duty trucks, cars, and other vehicles. Although the cost is higher than a PVC tarp, it will provide better economic protection against fuel vapors and emissions for your engine. So, what should you do if your diesel tank is leaking?
Polyethylene Plastic Surrounds
The answer lies in using polyethylene Plastic Surrounds or Plastics. These plastic tanks can help minimize corrosion, and they are not affected by temperature, oxygen, moisture, or sound. This type of plastic material can resist corrosion caused by hydrogen sulfide gas, oxygen, and excess moisture.
Double-Walled tank
A double-walled tank offers a much better solution for Removing Fuel Contaminants from seeping into the fuel or collecting inside the tank. In case you did not know it, a PVC tarp around your diesel storage tanks and engines is not enough! You also need a fuel absorbent cloth, pressure washer, or similar device to remove the moisture and contaminants. Many products can help you with this task, and they are easily affordable.
Leaking Tanks and Fuel Contamination
If your tank is leaking, then the contaminants must be removed before you can improve your fuel efficiency and lower your maintenance costs. In order to minimize corrosion, you need first to identify all possible contaminants. A fuel additive such as nitrogen-free gas, low-methane gas, or other synthetic fuels will significantly improve the performance of your engine. However, most manufacturers recommend using a regular fuel polishing paste, which can work well for removing contaminants and improving the performance of your engine at the same time.
Fuel Filter Bowl
The fuel filter bowl is another area where you can improve fuel mileage and prolong the life of your fuel system. Fuel filter bowls should have a micron rating for fuel particles to be filtered effectively. For your information, even though a small particle of metal can still pass through an oil-free filter, the flow rate and the diameter of the smallest particles are so large that intense vibrations will easily dislodge them in the engine.
Protection Against Corrosion
Another option for removing contaminants from the fuel is to protect the tank from corrosion. If you can keep your tank away from the car body, then you will minimize corrosion. A good option for doing this is to use a fuel additive. These additives have many options, but the best ones are designed to protect against rust and corrosion. If you are using a non-metallic tank, then you will need to add zinc to the tank. Zinc has been shown to prevent rust and reduce the probability of corrosion if it mixes with water.
