In micro irrigation, water is applied frequently in small amounts, usually in the form of discrete drops or tiny streams. To apply micro-irrigation, emitters are installed along the water delivery line. You can find them in most hardware stores or online. The type of micro irrigation fittings you need depends on your needs. For example, if you need to water many plants, you’ll need a small emitter to provide a fine stream of water to each plant.

Barbed fittings

There are a few factors to consider when choosing barbed micro fittings. Barbed fittings do not allow you to remove or move them. The fittings should not be used if you plan to change your irrigation system in the future. A few advantages of using fittings include their durability, ease of installation, and low cost. To learn more, read on. We’ve outlined some of the pros and cons of each fitting style.

Barbed fittings are a great option for drip irrigation systems because they’re inexpensive and easy to use. Barbed fittings are typically available for 1″, 1/2″, and 3/4″ tubing. To install a barbed fitting, simply push it into the open end of the tubing and then secure it with the included goof plug. Barbed fittings are particularly difficult to push into when the tubing is cold, but they’re still worth the trouble.

Elbow irrigation fittings

Micro fittings for elbows is available in different sizes and types. A 1/4″ barbed elbow makes a 90-degree turn in micro tubing. These are a great choice if you need to reach deep into a container. Some fittings even fit into a 1/2″ dripper line. You may want to consider getting a couple of different sizes to ensure you have enough for your needs. Learn more about each type of elbow and choose the right one for your situation to get started.

The barbed elbow is one of the more popular micro-irrigation fittings. It incorporates a 90-degree bend to 5/8 in. distribution tubing and connects two sections of dripline. The barbed ends anchor into the tubing. If your tubing is stiff, you should soften it with hot water or exposure to the sun. It’s made from durable polyoxymethylene (also called acetal) material.

Compression irrigation fittings

When using compression irrigation fittings for micro irrigation, the size and length of the tubing must be determined before a fitting can be used. These fittings are designed for tubing ranging from 1/2 inch to 3/4 inch and are available in various color codes for ease of identification. Besides couplings and elbows, you can also find compression fittings that fit male threads and spigots. They are easy to install and are very fast to install.

The advantages of compression irrigation fittings over other fittings include full flow characteristics and ease of installation.