It takes a lot to turn a natural edge into a hollow vessel; from the research, you will realize that one thing is constant, the same tips you use to cut the outer of the wood edge are the same thing you do for the inner bowl. Still, the inside needs some attention where you do not use a continuous rim; you should consider a broken edge instead. Like any other activity that needs attention, making hollow vessels requires following various steps and methods to facilitate this; with various creations, people use a different style to come up with the open thing. Therefore you need to know multiple things about the methods, and any other important thing you might think is crucial. Everything you should know about the turning and creation is here

The methods applicable

The whole thing starts by shaping the outside of the wood and removing the inside later; various tools and methods can be used to remove the knowledge depending on what works best. Start by roughing out the burl, find the cutters that can easily cut the outside, ensure that it is close to making an inward curve ensure you choose handheld and versatile tools for cutting any other outside activity. The tools should be convenient in that they perform what you intend to work on well without using support tools.

Turning

Start turning in between the wood centers you are working on; the burl you choose to use for the purpose should have bark on one of its sides. Put the driller in the correct position middle of the burl through the bark and to the wood, ensure the tailstock fits perfectly in the drilled hole. It is the safest way to do it; keep in mind that there is no specific grain direction, and therefore expect the grains to move in all directions.

The spigot turning

When you attain the desired shape, make a spigot to hold the vessel, you can use a beading parting tool to make the stopper. You will need a smoother surface that can be easily sanded; consider doing the scarping cut using a sharp scraper to make sure it ends with a beautiful smooth finish. You can scrape more depending on the level of smoothness and beauty you want to acquire.

The bottom line

There are various ways to do this; it depends on the tools you have to make your way through creating hollow vessels. You can research and find out what works best for you and what you have.