There are a few pool leak detection techniques pool owners can use to find leaks in their pools. They include visual inspections, chemical testing, and water pressure tests. This article will discuss the different ways you can find pool leaks using these three methods. If you have any questions about pool leak repairs Perth, please feel free to contact us!

Inspections:

When pool owners look around the pool deck, they can often see signs of pool leaks. These may include cracks, missing tiles, or adhesive near pool fittings. If you notice any of these issues on your pool deck, this is a good sign that there could be a leak somewhere in your pool plumbing system.

It’s easy to assume that if water is pumping out from under the ground surrounding the pool, it must be coming from your pool pump, but this isn’t always true because some pools have buried pumps and lines hidden underground. In contrast, others do not have anything going beneath them at all! In addition to inspecting for visible problems, homeowners should also check their skimmers and filtration systems as these areas tend to accumulate debris that has been carried into the pool from stormwater runoff, which could be hampering proper pool drainage.

It’s an excellent idea to check for pool leaks regularly as they can lead to some severe damage if left untreated, and it is also essential to know that there are different ways of going about this depending on whether or not you have an above ground pool or one installed in your backyard!

Chemical Testing:

If you have an above-ground pool, the first thing you can do to check for pool leaks is conducted a chemical test. Fill up around a third of your pool with water and then add a few drops of food coloring or dye into the pool — don’t worry about overdoing it, as this will give you more accurate results!

After waiting for at least 15 minutes, look closely at the pool walls and floor — any areas where there is no colored water means that there’s likely something wrong with either your skimmer or pump, which could be causing water loss from your pool.

Water pressure tests:

The next thing you can do to check pool leaks is a pressure test that involves adding air into the pool until about two feet of water is remaining. After this has been completed, use an electronic pool tester and place it near your skimmer — any readings below normal levels will indicate where the leak is coming from if not directly at the skimmer itself!

Electronically detecting pool leaks:

Another way to detect pool leaks Perth residents often employ is electronically seeing them using either infrared thermometers or ultrasonic detectors; both methods are great for pinpointing exactly where on your pool surface (or even inside) you need to search for potential cracks to conduct repairs as possible.

These ways are the most common pool leak repairs Perth residents employ, but there are plenty of other methods you can use to find pool leaks!